RYYQ-T

RYYQ52T7Y1BRYYQ26T7Y1BRYYQ20T7Y1B
SystemOutdoor unit module 1RYMQ16T7Y1BRYMQ12T7Y1B
Outdoor unit module 2RYMQ18T7Y1BRYMQ14T7Y1B
Outdoor unit module 3RYMQ18T7Y1B
Cooling capacityNom.kW145.0 (1)73.5 (1)56.0 (1)
Heating capacityNom.kW162.0 (2)82.5 (2)63.0 (2)
Power input – 50HzCoolingNom.kW42.4 (1)20.0 (1)18.5 (1)
HeatingNom.kW41.6 (2)20.3 (2)17.0 (2)
EER3.42 (1)3.68 (1)3.03 (1)
COP3.89 (2)4.06 (2)3.71 (2)
ESEER4.99 (17)
6.42 (18)
5.39 (17)
6.89 (18)
4.42 (24)
5.67 (25)
Capacity rangeHP522620
Maximum number of connectable indoor units64 (3)64 (3)64 (3)
Indoor index connectionMin.650325250
Nom.1,300650500
Max.1,690845650
DimensionsUnitHeightmm1,685
Widthmm1,240
Depthmm765
WeightUnitkg398
FanAir flow rateCoolingNom.m³/min261
External static pressureMax.Pa78
CompressorTypeHermetically sealed scroll compressor
Operation rangeCoolingMax.°CDB43
HeatingMin.°CWB-20
Max.°CWB15.5
Sound power levelCoolingNom.dBA88
Sound pressure levelCoolingNom.dBA66
RefrigerantTypeR-410A
Piping connectionsLiquidTypeBraze connection
ODmm19.119.115.9
GasTypeBraze connection
ODmm41.334.928.6
Heat insulationLiquid, gas and equalizing pipeLiquid, gas and equalizing pipeBoth liquid and gas pipes
Total piping lengthSystemActualm1,000 (10)1,000 (10)1,000 (7)
Level differenceOU – IUOutdoor unit in highest positionm90 (10)90 (10)90 (7)
Indoor unit in highest positionm90 (10)90 (10)90 (7)
IU – IUMax.m30 (10)30 (10)30 (7)
Standard AccessoriesItemInstallation and operation manual
ItemConnection pipes
Power supplyNameY1Y1Y1
Phase3N~3N~3N~
FrequencyHz505050
VoltageV380-415380-415380-415
NotesCooling: indoor temp. 27°CDB, 19.0°CWB; outdoor temp. 35°CDB; equivalent piping length: 5m; level difference: 0mCooling: indoor temp. 27°CDB, 19.0°CWB; outdoor temp. 35°CDB; equivalent piping length: 5m; level difference: 0mCooling: indoor temp. 27°CDB, 19°CWB; outdoor temp. 35°CDB; equivalent piping length: 5m; level difference: 0m
Heating: indoor temp. 20°CDB; outdoor temp. 7°CDB, 6°CWB; equivalent refrigerant piping: 5m; level difference: 0mHeating: indoor temp. 20°CDB; outdoor temp. 7°CDB, 6°CWB; equivalent refrigerant piping: 5m; level difference: 0mHeating: indoor temp. 20°CDB; outdoor temp. 7°CDB, 6°CWB; equivalent refrigerant piping: 5m; level difference: 0m
Actual number of connectable indoor units depends on the indoor unit type (VRV indoor, Hydrobox, RA indoor, etc.) and the connection ratio restriction for the system (50%Actual number of connectable indoor units depends on the indoor unit type (VRV indoor, Hydrobox, RA indoor, etc.) and the connection ratio restriction for the system (50%Actual number of connectable indoor units depends on the indoor unit type (VRV indoor, Hydrobox, RA indoor, etc.) and the connection ratio restriction for the system (50%
RLA is based on following conditions: indoor temp. 27°CDB, 19°CWB; outdoor temp. 35°CDBRLA is based on following conditions: indoor temp. 27°CDB, 19°CWB; outdoor temp. 35°CDBFor more details on operation range see TW drawing
MSC means the maximum current during start up of the compressor. VRV IV uses only inverter compressors. Starting current is always ≤ max. running current.MSC means the maximum current during start up of the compressor. VRV IV uses only inverter compressors. Starting current is always ≤ max. running current.Voltage range: units are suitable for use on electrical systems where voltage supplied to unit terminal is not below or above listed range limits.
Select wire size based on the value of MCA. The MCA can be regarded as the maximum running current.Select wire size based on the value of MCA. The MCA can be regarded as the maximum running current.Maximum allowable voltage range variation between phases is 2%.
MFA is used to select the circuit breaker and the ground fault circuit interrupter (earth leakage circuit breaker).MFA is used to select the circuit breaker and the ground fault circuit interrupter (earth leakage circuit breaker).Refer to refrigerant pipe selection or installation manual
Voltage range: units are suitable for use on electrical systems where voltage supplied to unit terminal is not below or above listed range limits.Voltage range: units are suitable for use on electrical systems where voltage supplied to unit terminal is not below or above listed range limits.For more details on standard accessories refer to Installation/operation manual
Maximum allowable voltage range variation between phases is 2%.Maximum allowable voltage range variation between phases is 2%.RLA is based on following conditions: indoor temp. 27°CDB, 19°CWB; outdoor temp. 35°CDB
Refer to refrigerant pipe selection or installation manualRefer to refrigerant pipe selection or installation manualMSC means the maximum current during start up of the compressor. VRV IV uses only inverter compressors. Starting current is always ≤ max. running current.
In accordance with EN/IEC 61000-3-11, respectively EN/IEC 61000-3-12, it may be necessary to consult the distribution network operator to ensure that the equipment is connected only to a supply with Zsys ≤ Zmax, respectively Ssc ≥ minimum Ssc value.In accordance with EN/IEC 61000-3-11, respectively EN/IEC 61000-3-12, it may be necessary to consult the distribution network operator to ensure that the equipment is connected only to a supply with Zsys ≤ Zmax, respectively Ssc ≥ minimum Ssc value.Select wire size based on the value of MCA. The MCA can be regarded as the maximum running current.
European/International Technical Standard setting the limits for voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current ≤ 75A.European/International Technical Standard setting the limits for voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current ≤ 75A.MFA is used to select the circuit breaker and the ground fault circuit interrupter (earth leakage circuit breaker).
European/International Technical Standard setting the limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16A andEuropean/International Technical Standard setting the limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16A andTOCA means the total value of each OC set.
Short-circuit powerShort-circuit powerFLA means the nominal running current of the fan
system impedancesystem impedanceIn accordance with EN/IEC 61000-3-11, respectively EN/IEC 61000-3-12, it may be necessary to consult the distribution network operator to ensure that the equipment is connected only to a supply with Zsys ≤ Zmax, respectively Ssc ≥ minimum Ssc value.
Multi combination (22~54HP) data is corresponding with the standard multi combination as mentioned on 3D079534Multi combination (22~54HP) data is corresponding with the standard multi combination as mentioned on 3D079534European/International Technical Standard setting the limits for voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current ≤ 75A.
The STANDARD ESEER value corresponds with normal VRV4 Heat Pump operation, not taking into account advanced energy saving operation functionalityThe STANDARD ESEER value corresponds with normal VRV4 Heat Pump operation, not taking into account advanced energy saving operation functionalityEuropean/International Technical Standard setting the limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16A and
The AUTOMATIC SEER value corresponds with normal VRV4 Heat Pump operation, taking into account advanced energy saving operation functionality ( variable refrigerant temperature control operation)The AUTOMATIC SEER value corresponds with normal VRV4 Heat Pump operation, taking into account advanced energy saving operation functionality ( variable refrigerant temperature control operation)Short-circuit power
Sound values are theoretical values based on sound results of individual installed units. Possible deviations due to variety of installation patterns are not taken into account.Sound values are theoretical values based on sound results of individual installed units. Possible deviations due to variety of installation patterns are not taken into account.system impedance
Soundpressure system [dBA] = 10*log[10^(A/10)
10^(B/10)
10^(C/10)] , with Unit A = A dBA, Unit B = B dBA, Unit C = C dBA
Soundpressure system [dBA] = 10*log[10^(A/10)
10^(B/10)
10^(C/10)] , with Unit A = A dBA, Unit B = B dBA, Unit C = C dBA
Multi combination (22~54HP) data is corresponding with the standard multi combination as mentioned on 3D079534
Sound power level is an absolute value that a sound source generates.
Sound pressure level is a relative value, depending on the distance and acoustic environment. For more details, please refer to the sound level drawings.
Sound values are measured in a semi-anechoic room.
The STANDARD ESEER value corresponds with normal VRV4 Heat Pump operation, not taking into account advanced energy saving operation functionality

Địa chỉ: 106 Cách Mạng Tháng Tám, Khuê Trung, Cẩm Lệ, Đà Nẵng
Email: quoctungme@gmail.com
Hotline0905.999.643

0/5 (0 Reviews)

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Tìm cửa hàng
Gọi trực tiếp
Chat ngay
Chat trên Zalo